Saturday, September 18, 2010

Concurrent Manager: Output Post-processor issue

The concurrent program the output of which is XML report is failing in warning and the log shows the below message:
Beginning post-processing of request 5292785 on node AP6105RT at 02-AUG-2006 04:47:48. Post-processing of request 5292785 failed at 02-AUG-2006 04:49:48 with the error message:

The Output Post-processor is running but has not picked up this request. No further attempts will be made to post-process this request, and the request will be marked with Warning status.
Setting the profile option Concurrent: OPP Response Timeout to a higher value may be necessary. Example if the responce time is set to 60 make it atleast 180. Bounce the concurrent manager once this is done. This will resolve the issue.

If the issue still persist, check the OPP log file. You follow below navigation

System Administrator -> Concurrent : Manager -> Administrator

On this screen click on Output Post Processor and then click on Processes button -> Manager Log button

A new web page will open showing the manager log. Come to the bottom, you might see followng error

[10/7/08 10:15:56 PM] [1900472:RT5709298] Completed post-processing actions
for request 5709298.
[10/7/08 10:20:07 PM] [OPPServiceThread1] Post-processing request 5709301.
[10/7/08 10:20:07 PM] [1900472:RT5709301] Executing post-processing actions
for request 5709301.
[10/7/08 10:20:07 PM] [1900472:RT5709301] Starting XML Publisher
post-processing action.
[10/7/08 10:20:07 PM] [1900472:RT5709301]
@ Template code: FAXSRPIM
Template app: OFA
Language: EN
Territory: US
Output type: PDF
[10/7/08 10:20:07 PM] [UNEXPECTED] [1900472:RT5709301]
/appslog/fin_top/utl/fintest/out/ (No such
file or directory)
at Method)
@ at oracle.apps.xdo.common.tmp.TmpFile.createTmpFileJDK118(
@ at oracle.apps.xdo.common.tmp.TmpFile.createTmpFile(
at oracle.apps.xdo.template.FOProcessor.createFO(
at oracle.apps.xdo.template.FOProcessor.generate(

So the path /appslog/fin_top/utl/fintest/out/ is not correct. As per the note ID 428855.1 changed the path to valid location

Navigate the following as the responsibility “XML Publisher Administrator”
Select Administration on the Personal Home Page
Under the Configuration tab select Properties and then General.
From there the Temporary directory will be displayed.

Changed the path to some thing that is existing physically.

After that bounce the output post processor. This should resolve the issue

No comments:

Post a Comment