Upgradation of 10g Application Server Home (10.1.3 Home to 10.1.3.3) in R12

Oracle Note : 454811.1
Upgrading Oracle E-Business Suite Release 12 10.1.3 Oracle Home to Oracle 10gAS Patch Set 3 (10.1.3.3)

Steps:
To check Oracle Home Version : $ORACLE_HOME/config/ias.properties
1) make sure the FE services are up and running
$INST_TOP/admin/scripts/adopmnctl.sh status
2) 6148874
========
set the env to 10.1.3 home
. $INST_TOP/ora/10.1.3/TEST_INST_test-inst-09.env
echo $ORACLE_HOME
should point to ORACLE_HOME=/apps/test_inst/apps/tech_st/10.1.3
export PATH=$PATH:$ORACLE_HOME/OPatch
make sure that make,ar,ld,nm are in $PATH
make sure that /apps/test_inst/apps/tech_st/10.1.3/oraInst.loc is pointing to the right inventory location
(/apps/local/TEST_INST/inst/apps/COEPCH_test-inst-09/admin/oraInventory)
If no inventory exists under $INST_TOP/admin then copy the central inventory to this location.
opatch lsinventory -invPtrLoc /apps/test_inst/apps/tech_st/10.1.3/oraInst.loc
Make sure the output is correct. This should not error out.
Apply the above patch through runinstaller on all the non shared FS’s
unzip the patch under dir 6148874
export DISPLAY=local_host:0.0
cd 6148874/Disk1
./runInstaller -invPtrLoc /apps/test_inst/apps/tech_st/10.1.3/oraInst.loc
Enter the user password ‘secret’ if default one was not changed..
3. Run root.sh
4. shutdown any services started by above installation
$INST_TOP/admin/scripts/adstpall.sh
5. Run autoconfig on all application tier nodes after 10.1.3.3 patch set installtion.
6. 6655812
=======
Apply SSO-OID Patch
Unzip the downloaded zip file into a folder
set the environment to 10.1.3
set the env to 10.1.3 home
. $INST_TOP/ora/10.1.3/TEST_INST_test-inst-09.env
echo $ORACLE_HOME
should point to ORACLE_HOME=/apps/test_inst/apps/tech_st/10.1.3
export PATH=$PATH:$ORACLE_HOME/OPatch
make sure that make,ar,ld,nm are in $PATH
make sure that /apps/test_inst/apps/tech_st/10.1.3/oraInst.loc is pointing to the right inventory location
(/apps/local/TEST_INST/inst/apps/TEST_INST_test-inst-09/admin/oraInventory)
If no inventory exists under $INST_TOP/admin then copy the central inventory to this location.
opatch lsinventory -invPtrLoc /apps/test_inst/apps/tech_st/10.1.3/oraInst.loc
Make sure the output is correct. This should not error out.
Apply the above patch through runinstaller on all the non shared FS’s
unzip the patch under dir 6655812
export DISPLAY=local_host:0.0
cd 6655812/Disk1
./runInstaller -invPtrLoc /apps/test_inst/apps/tech_st/10.1.3/oraInst.loc
During installation, OUI may ask you to choose option ‘Yes/No’ in “Register Oracle Application Server Metadata Repository” OUI screen.
Choose ‘No’ and proceed further.
shutdown any services started by above installation
7. Run autoconfig on all the application tier nodes after 10.1.3.3 SSO-OID patch installation.
8. Apply the below additional patches through opatch:
6311835
5919967
6311835
=======
set the env to 10.1.3 home
. $INST_TOP/ora/10.1.3/TEST_INST_test-inst-09.env
echo $ORACLE_HOME
should point to ORACLE_HOME=/apps/test_inst/apps/tech_st/10.1.3
export PATH=$PATH:$ORACLE_HOME/OPatch
make sure that /apps/test_inst/apps/tech_st/10.1.3/oraInst.loc is pointing to the right inventory location
(/apps/local/COEPCH/inst/apps/TEST_INST_test-inst-09/admin/oraInventory)
If no inventory exists under $INST_TOP/admin then copy the central inventory to this location.
opatch lsinventory -invPtrLoc /apps/test_inst/apps/tech_st/10.1.3/oraInst.loc
Make sure the output is correct. This should not error out.
cd 6311835
/apps/test_inst/PATCHES/2617419/OPatch/opatch apply -invPtrLoc /apps/test_inst/apps/tech_st/10.1.3/oraInst.loc
apply the patch with optach 2617419 version to avoid below error
————————error ——————————
Invoking fuser to check for active processes.
OPatch detects your platform as 46 while this patch 6311835 supports platforms:
0 (Generic Platform)
This patch is not suitable for this operating system.
Please contact support for the correct patch.
ERROR: OPatch failed during pre-reqs check.
# Workaround: Apply the fix for OPatch bug 2617419 from Oracle Metalink at
# http://metalink.oracle.com. Then other Oracle SES one-off patches can be
# applied using OPatch.
FIX:
apply patch with opatch 2617419 version
——————————————————————–
5919967
=======
set the env to 10.1.3 home
. $INST_TOP/ora/10.1.3/TEST_INST_test-inst-09.env
echo $ORACLE_HOME
should point to ORACLE_HOME=/apps/test_inst/apps/tech_st/10.1.3
export PATH=$PATH:$ORACLE_HOME/OPatch
make sure that /apps/test_inst/apps/tech_st/10.1.3/oraInst.loc is pointing to the right inventory location
(/apps/local/TEST_INST/inst/apps/TST_INST_test-inst-09/admin/oraInventory)
If no inventory exists under $INST_TOP/admin then copy the central inventory to this location.
opatch lsinventory -invPtrLoc /apps/test_inst/apps/tech_st/10.1.3/oraInst.loc
Make sure the output is correct. This should not error out.
cd 5919967
opatch apply -invPtrLoc /apps/test_inst/apps/tech_st/10.1.3/oraInst.loc
9) Generate product JAR files with no force option from adadmin
10) verify patch application
Invoke runInstaller on Unix and Linux or setup.exe on the Windows platform.
Click on Installed products.
Select the 10.1.3 Oracle Home and expand the tree. You will see Oracle Application Server Patchset 10.1.3.3 and 10.1.3.3 SSO-OID patch installed in the list